JL/JE Series Manual/Electric High Lift Trucks

Introduction of high lift truck

High lift truck is a new design with larger piston to offer you real 1000kg and 1500kg capacity. This series JL are manual high lift pallet jack and JE are electric high lift truck. It is very suitable as ລົດບັນທຸກມືປະສົມແລະໂຕະຍົກ. ດ້ວຍມືຈັບທີ່ອົບອຸ່ນ ergonomic, ມັນງ່າຍດາຍຫຼາຍແລະສະດວກສະບາຍ ສຳ ລັບທ່ານທີ່ຈະປະຕິບັດງານ. ນອກຈາກນີ້, ຂາຮອງຮັບດ້ານ ໜ້າ ແລະສະຖຽນລະພາບທີ່ສາມາດປັບໄດ້ໄດ້ຂະຫຍາຍໄປສູ່ພື້ນເຮືອນໂດຍອັດຕະໂນມັດດ້ວຍການເພີ່ມຂື້ນຂອງສ້ອມເຊິ່ງສາມາດຮັບປະກັນຄວາມ ໝັ້ນ ຄົງສູງສຸດແລະເບກທີ່ດີທີ່ສຸດ. ມັນສາມາດຮັກສາຄວາມໄວໄດ້ຄືກັນໂດຍບໍ່ສົນເລື່ອງຂອງລົດບັນທຸກທີ່ມີຫລືບໍ່ມີການໂຫຼດ.

This high lift pallet trucks can lift the pallets loading or unloading to the height you need. they can be used in various applications like factory, workshop, warehouse etc.

The manual high lift pallet truck has model: JL5210, JL6810, JL5215, JL6815;

The electric high lift pallet truck has model: JE5210, JE6810, JE5215, JE6815

             Manual high lift pallet truck JL series

We have this item in stock in France, if you are located in Europe, we can arrange delivery to you ASAP! This way will save your time and shipping cost.

Specifications of manual high lift skid jack truck:

Electric high lift pallet truck JE series

 

• High quality oil cylinder: The integrally sealed hydraulic cylinder can effectively avoid the disadvantages of oil leakage, improve the safety performance of the whole vehicle, lift quickly and improve work efficiency.
• Comfortable handle: Ergonomic design, the outer layer is rubberized and non-slip, the operation feels comfortable, and the drop speed of the hand-pulled pressure relief heavy cargo is controllable, which improves the operation safety.
• Exquisite workmanship: The surface of the car body has been subjected to high temperature baking paint, electrostatic spraying, the surface is smooth and smooth, durable, beautiful and corrosion-resistant.
• Anti-pinch scissors: The scissors are designed with increased spacing and anti-clamping to prevent accidental clamping of other items. Thickened steel enhances the bearing capacity, making it safer and more durable.

• ຈັກສູບນ້ ຳ ແລະແສງສະຫວ່າງງ່າຍທີ່ສຸດເຮັດໃຫ້ ໜ່ວຍ ນີ້ມີຄວາມ ເໝາະ ສົມຫລາຍກັບລົດບັນທຸກມືແລະໂຕະຍົກ
• ການຄວບຄຸມຄວາມໄວແບບອັດຕະໂນມັດໂດຍປ່ຽງໄຮໂດຼລິກທີ່ເປັນເອກະລັກ, ຄວາມໄວທີ່ຫຼອກລວງສະເຫມີຮັກສາຄືກັນບໍ່ວ່າລົດບັນທຸກຈະມີຫຼືບໍ່ມີການໂຫຼດ. ມັນຈະປ້ອງກັນຄວາມເສຍຫາຍຂອງສິນຄ້າຈາກການລົງຢ່າງໄວວາ.
• ການອອກແບບທີ່ ໜັກ: ເຫຼັກຂະ ໜາດ 4 ມມແລະກອບຍົກຂະ ໜາດ ໃຫຍ່ຮັບປະກັນໃຫ້ລົດບັນທຸກໄດ້ບັນລຸຄວາມສາມາດທີ່ຖືກຈັດອັນດັບ
• ເໝາະ ສົມຫຼາຍກັບລົດບັນທຸກມືປະສົມແລະໂຕະຍົກ
• ຂາຮອງຮັບດ້ານ ໜ້າ ແລະສະຖຽນລະພາບທີ່ສາມາດປັບໄດ້ຂະຫຍາຍໄປສູ່ພື້ນເຮືອນໂດຍອັດຕະໂນມັດໃນເວລາທີ່ຄວາມຍາວຂອງສ້ອມສູງເຖິງ 420mm, ເພື່ອຮັບປະກັນຄວາມ ໝັ້ນ ຄົງສູງສຸດແລະເບກທີ່ດີທີ່ສຸດ.
• ປະຕິບັດຕາມ EN1757-4.

ຄວາມສົນໃຈແລະການ ບຳ ລຸງຮັກສາ:

ບໍ່ໃຫ້ເກີນ ກຳ ນົດ;
ບໍ່ວ່າຈະເປັນເງື່ອນໄຂໃນພື້ນທີ່ອະນຸຍາດໃຫ້ ນຳ ໃຊ້;
ໂຫຼດສິນຄ້າຢ່າງຖືກຕ້ອງ;
ໃສ່ເກີບແລະຖົງມືທີ່ປອດໄພເມື່ອຈັບ;
ກະລຸນາກວດສອບການ ດຳ ເນີນງານຢ່າງລະອຽດກ່ອນການ ນຳ ໃຊ້ແຕ່ລະຄັ້ງ;
ການລວບລວມເຄື່ອງດ້ວຍເຕັກນິກການຍົກທີ່ຖືກຕ້ອງ;
Don't overlook the potential dangers that may exist during operation.

Proper maintenance will extend the life of the truck.
Check the oil, remove air and lubricate during maintenance.
Check the oil level every six months.
The newly injected oil to the rubber container should be 5mm below the liquid level, and the fork must be at the lowest position when adding oil.
When replacing the seal, air may enter the hydraulic system, place the joystick in the LOWER position, and then swing the handle a dozen times.
Lubricate the movable part with motor oil or oil.
Also pay attention to daily inspection and maintenance.
Inspection of the truck can reduce wear as much as possible.
Special attention should be paid to the wheel, axle, handle, fork, lift and lowering control.
Whenever work is completed, the fork should be unloaded and lowered to the lowest position.